Ziehl-Abegg' Board (http://www.ziehl-abegg.com/forum/index.php)
- english (http://www.ziehl-abegg.com/forum/board.php?boardid=9)
--- Ventilation and Control Technology (http://www.ziehl-abegg.com/forum/board.php?boardid=10)
---- centrifugal fans (http://www.ziehl-abegg.com/forum/board.php?boardid=13)
----- Type Details (http://www.ziehl-abegg.com/forum/thread.php?threadid=53)


Posted by vks0264 on 15.01.2008 at07:43:

  Type Details

Hello,

I have an ABB Multidrives using Ziehl cooling fans of two types; G2E140-AI51-ABB1 and D4E 225-CC01-39. Unfortunately I could not find these type codes in website catalog. Are these type numbers old? Can Zeihl identify these units and be able to supply the same?

Geetings,

Valentino



Posted by Michael Dietrich on 15.01.2008 at10:08:

  RE: Type Details

Dear Valentino,

the mentioned types are not Ziehl-Abegg-fans. But we can offer to you alternative solutions:

1. RG14S-2EP.WC.AR
2. RD20S-4EW.4C.1L or RD25S-4EW.4N.1L

Please see attached pdf-file for further details.

Best regards

Ziehl-Abegg AG

Michael Dietrich



Posted by vks0264 on 15.01.2008 at11:05:

  RE: Type Details

Thank you Michael for your reply. I will check the attached data sheet. meanwhile, which of the distributors can supply for UAE?

warm regards,
Valentino



Posted by Michael Dietrich on 15.01.2008 at16:16:

  RE: Type Details

Dear Valentino

normally, the UAE are served directly from Germany.
You can send your inquiry or order to me and I will forward it to my colleague who is working on the UAE.

Best regards

Ziehl-Abegg AG

Michael Dietrich



Posted by vks0264 on 20.01.2008 at10:19:

  RE: Type Details

Dear Michael,
I have checked my existing fans and item 1 of your alternative offer is definitely is correct unit for my existing fan.
Unfortunately, the item 2 is not. My existing fan has outlet flange dimensions of 341mm x 304mm on the outside, and 287mm x 284 on the inside. Do you manufacture fans of this dimentioned?

regards,
Valentino



Posted by Michael Dietrich on 21.01.2008 at09:11:

  RE: Type Details

Dear Valentino,

please see attached pdf-file. This is a RD22P-fan with the flange dimensions 279x281 mm. The outer flange dimensions are 338x338 mm.
Please check if this fan would fit.

Best regards

Ziehl-Abegg AG

Michael Dietrich



Posted by vks0264 on 03.02.2008 at12:12:

  RE: Type Details

Dear Michael,
I appreciate your assistance but the fan that you mentioned does not fit. I have to find a fan that have exact flange dimensions. The mounting of the fan on the drives cubicle is such that there is a rail at the bottom of the inverter where the flange is inserted from the front side and locking plate is tightened by two screws. The fan hangs in the bottom of the inverter by its flange.

best regards,
Valentino



Posted by Michael Dietrich on 05.02.2008 at11:02:

  RE: Type Details

Dear Valentino,

I checked again our possibilities to offer a suitable fan to you. Unfortunately we do not have any fan with the flange dimensions 287mm x 284 mm you mentioned.
For your information. We are increasing our product range of such smaller fans continuously. Maybe we will be able to offer an alternative solution in the near future. But up to now we cannot offer you a suitable fan. Sorry for that.

Best regards

Ziehl-Abegg AG

Michael Dietrich



Posted by vks0264 on 18.02.2008 at12:19:

  RE: Type Details

That's ok Michael. I will contact you if I will if I have requirements in the future.

Thanks,
Valentino



Posted by vks0264 on 18.02.2008 at12:21:

  RE: Type Details

That's ok Michael. I will contact you if I will have requirements in the future.

Thanks,
Valentino


Powered by: Burning Board © 2001-2004 WoltLab GmbH