Specification: Single inlet L series motorised impellers, intended for use without scroll housings. Impeller diameters from 190 to 310 mm are available, resulting in air volumes up to 2,000 mł/h.
Attributes and special features: Optimised motor cooling and compact construction are achieved through integrating the voltage controllable external rotor motor into the impeller. Motor design 1~ 230V, 50/60Hz
Applications: Duct, tube and roof fans, air conditioning units, heat pumps, for cooling and ventilation purposes
Specification: Single inlet M series motorised impellers, intended for use without scroll housings. Impeller diameters from 225 to 900 mm are available, resulting in air volumes up to 31,000 mł/h.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller. The motorised impellers are also available in ATEX design.
Applications: Duct, tube and roof fans, air conditioning units, heat pumps, cleanrooms, and for cooling and ventilation purposes
Centrifugal fan RH..M design, explosion-proof
type of protection increased safety "e", T3 or T4
Specification: Single inlet M series motorised impellers, intended for use without scroll housings. Impeller diameters from 280 to 630 mm are available, resulting in air volumes up to 10,000 mł/h.
Attributes and special features: Fans according type of protection increased safety "e" conform to category 2 G and may be applied where a dangerous explosive atmosphere occurs only occasionally during normal operation.
Specification: Single inlet N series motorised impellers, intended for use without scroll housings. Impeller diameters from 500 to 630 mm are available, resulting in air volumes of up to 16,000 mł/h.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller. High power density.
Applications: Duct, tube and roof fans, air conditioning units, heat pumps, and for cooling and ventilation purposes
Specification: Single inlet E series motorised impellers, intended for use without scroll housings. Impeller diameters from 500 to 630 mm are available, resulting in air volumes up to 16,000 mł/h.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller. Low rotational noise impeller for noise-critical applications.
Applications: Duct, tube and roof fans, air conditioning units, heat pumps
Specification: Ready-to-install M series single inlet motorised impeller modules, with impeller diameters from 225 to 630mm. The air handling capacities correspond to the respective RH..M types. The sheet metal parts are made from galvanized sheet steel.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller. Vertical mounting position with anti-vibration mounts. Horizontal mounting position without anti-vibration mounts.
Applications: Air handling units, air conditioners, cleanrooms, electronic cooling
Specification: Ready-to-install N series single inlet motorised impeller modules, with impeller diameters from 500 to 630mm. The air handling capacities correspond to the respective RH..N types. The sheet metal parts are made from galvanized sheet steel.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller. Vertical mounting position with anti-vibration mounts. Horizontal mounting position without anti-vibration mounts.
Applications: Air handling units, electronic cooling
Specification: Ready-to-install G series single inlet motorised impeller modules, with impeller diameters from 315 to 450mm. The air handling capacities correspond to the respective RH..G types. The sheet metal parts are made from galvanized sheet steel.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller. Low rotational noise impeller for noise-critical applications.Vertical mounting position with anti-vibration mounts. Horizontal mounting position without anti-vibration mounts.
Applications: Air handling units, air conditioners, cleanrooms, electronic cooling
Specification: Ready-to-install E series single inlet motorised impeller modules, with impeller diameters from 500 to 630mm. The air handling capacities correspond to the respective RH..E types. The sheet metal parts are made from galvanized sheet steel.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller. Low rotational noise impeller for noise-critical applications.Vertical mounting position with anti-vibration mounts. Horizontal mounting position without anti-vibration mounts.
Applications: Air handling units, air conditioners, electronic cooling
Centrifugal fan RH..C design, explosion-proof
type of protection increased safety "e", T3 or T4
Specification: Motorless RH..C impeller with 7 rear backward curved blades. Impeller diameters from 225 to 1,000 mm, made from sheet steel with surface protection achieved through electrically conductive special coating RAL 9005. Equipped with fixed hub and inlet ring made of copper with measuring device.
Attributes and special features: RH..C centrifugal impellers in explosion protected design fulfill the requirements of the 94/9/EU (ATEX 95) directive, in accordance with the device group II, device group 2G and 3G, explosion group IIB, and can be utilized in zone 1 and zone 2.
Centrifugal fan ER..C design, explosion-proof
Three phase motor ignition protection class, EEX de IIC T4 pressure-proof housing
Specification: The ER..C plug fan, optimized for a very compact construction design. IEC-three phase motor EEX de IIC T4 with a PTC for fail-safe operation. Motorless RH..C impeller with 7 backward curved blades. Impeller diameters from 250 to 1,000 mm. Impeller made from sheet steel with surface protection achieved through electrically conductive special powder coating RAL 9005. Equipped with fixed hub and inlet ring made of copper with measuring device.
Attributes and special features: ER..C plug fans in explosion protected design fulfill the requirements of the 94/9/EU (ATEX 95) directive, in accordance with the device group II, device group 2G and 3G, explosion group IIB, and can be utilized in zone 1 and zone 2.
Specification: Cross-flow fans with cylinder diameters from 60 to 120 mm and construction lengths of up to 1,200 mm. Housing with flow-through in 90° or 180° direction. Housing made using stable aluminium continuous-casting technology. Cylinders available in all frame sizes with and without scroll housings.
Attributes and special features: 19" plug-in system, motor drive in 24 V direct current design (brushless electronic motor) can be supplied, 100% speed controllable.
Applications: Electronic cooling, process engineering, ventilation, cooling, climatisation, automotive air conditioning
Specification: Ziehl-Abegg external rotor motors combine the advantages of compact and space saving construction with the proven drive concept of a wear-free squirrel cage motor. 9 frame sizes are available in an output range of 0.1 to 7 kW and 2 constructional designs for flange or axis fastening. These external rotor motors are 100% speed controllable. Electronically commutated direct-current motors including the necessary EC controllers are also available. They are effective in many applications through their constant torque and high efficiency.
Operating instructions: Ръководство за експлоатация Двигатели с външен ротор L-BAL-026-BG (311 kb, downloads: 105, ) version/date: 05/08 Index 005 Ръководство за експлоатация Двигатели с външен ротор L-BAL-026-BG За вентилаторни задвижвания с увеличена безопас-
ност „e“ II 2G EEx e II, T1, T2, T3 или T4 съгласно
директива 94/9/EG(Ex e II T1, T2, T3 или T4 съгласно
IEC 60079-0; IEC 60079-7)-Типова серия MK-..Y (с регу-
лируеми обороти чрез пад на напрежението) Driftsvejledning udvendige rotormotorer L-BAL-026-DK (294 kb, downloads: 86, ) version/date: 04/08 Index 005 Driftsvejledning udvendige rotormotorer L-BAL-026-DK Til ventilatordrev i Řget sikkerhed "e" II 2G EEx e II, T1,
T2, T3 eller T4 iht.direktiv 94/9/EF (Ex e II T1, T2, T3 eller
T4 iht. IEC 60079-0; IEC 60079-7)-typeserie MK-..Y
(omdrejningstalregulerbar ved sćnkning af spćndingen) Ex Operating Instructions External Rotor Motors L-BAL-026-GB (289 kb, downloads: 2613, ) version/date: 05/08 Index 005 Based on DIN EN 60034-1 for fan drives
in increased safety „e“ II 2G EEx e II, T1, T2, T3 or T4 in accordance with directive 94/9/EU (Ex e II T1, T2, T3 or T4 to IEC 60079-0; IEC 60079-7)
- MK model range - . .Y (speed controllable
by voltage reduction) Ex Operating Instructions External Rotor Motors L-BAL-030-GB (165 kb, downloads: 2385, ) version/date: 05/08 Index 003 In accordance with DIN EN 60079-15 (IEC 60079-15: 2001, modified) for fan drives with ignition protection „n“ II 3G EExnA II T1, T2 or T3 (T1, T2, T3 or T4) based on directive 94/9/EU
- Model series MK - . .Z (speed controllable through voltage reduction) Naudojimo instrukcija Išoriniai rotorių varikliai L-BAL-026-LT (515 kb, downloads: 87, ) version/date: 04/08 Index 005 Naudojimo instrukcija Išoriniai rotorių varikliai L-BAL-026-LT Padidinto saugumo ventiliatoriaus pavaroms „e“ II 2G
EEx e II, T1, T2, T3 arba T4pagal direktyvą 94/9/EB(Ex e II
T1, T2, T3 or T4pagal IEC 60079-0; IEC 60079-7)-tipo
klasė MK-..Y (apsukų skaičius reguliuojamas mažinant
įtampą) Operating Instructions Electronically Commutated (EC) External Rotor Motors L-BAL-014-GB (147 kb, downloads: 2449, ) version/date: 04/08 Index 002 System ETAvent Operating Instructions Electronically Commutated (EC) External Rotor Motors L-BAL-028-GB (92 kb, downloads: 2639, ) version/date: 05/08 Index 002 System ETAvent
With integrated EC-Controller Operating Instructions permanently excited generators L-BAL-027-GB (105 kb, downloads: 2284, ) version/date: 05/08 Index 002
Declarations of incorporation/conformity: Declaration of Conformity ZA75 (485 kb, downloads: 4681, ) External rotor motor, axial, centrifugal and crossflow fans Declaration of Conformity ZA75ex (343 kb, downloads: 4138, ) External rotor motors, axial and centrifugal fans for explosion-hazardous areas Declaration of incorporation ZA74 (69 kb, downloads: 4641, ) External rotor motor, axial, centrifugal and crossflow fans Declaration of incorporation ZA74ex (82 kb, downloads: 3658, ) External rotor motors, axial and centrifugal fans for explosion-hazardous areas
