Specification: Vpro free running impeller with 6 backward curved, three-dimensional, profiled blades. Impeller diameters from 190 to 630 mm, made from composite material. Equipped with inlet ring.
Attributes and special features: High air volumes, high efficiency, low noise levels through optimised blade geometry, reduced blade passing noise. Air volumes up to 15,000 m³/h free blowing, max. static pressures up to 1,000 Pa feasible.
Applications: Close control air handling Units, ventilation, air to water heat pumps, cleanroom technology
Documentation (catalogues/flyer): Flyer FE2owlet axial fan / Vpro centrifugal fan (211 kb, downloads: 4997, ) FE2owlet axial fan / Vpro centrifugal fan The new standard: quiet - efficient - unique Flyer Vpro (207 kb, downloads: 2929, ) Vpro Low noise centrifugal fan with profiled blades Catalogue Little Blue EC Axial and centrifugal fans
Specification: Single inlet L series motorised impellers, intended for use without scroll housings. Impeller diameters from 190 to 310 mm are available, resulting in air volumes up to 2,000 m³/h.
Attributes and special features: Optimised motor cooling and compact construction are achieved through integrating the voltage controllable external rotor motor into the impeller. Motor design 1~ 230V, 50/60Hz
Applications: Duct, tube and roof fans, air conditioning units, heat pumps, for cooling and ventilation purposes
Specification: Plug fan without housing for medium temperatures up to +250 °C. High efficiency impeller with backward curved blades and rotating diffuser. Square or rectangular fan supporting plates and troughs are available, both with 100mm thermal insulation. Compact construction, supplied either with adjusted mounted inlet cone or as motorized impeller with loose inlet cone.
Attributes and special features: Impeller diameter from 290 to 1030 mm for air volumes up to 58,000 m³/h and static pressure increases up to 2,700 Pa. Impeller and build-in dimensions free to configure. Designed using heat resistant coated steel sheet or stainless steel. Standard IEC motors up to 37 kW nominal power for frequency drive. Extensive special equipment.
Applications: Textile drying and coating, paper drying, lacquer drying systems, film production, industrial baking ovens, industrial ovens etc.
Specification: 7-sickle bladed profiled die-cast aluminium impeller, sizes from 315 to 1,000 mm, available in 60 Hz and UL types, air volume (freeblowing) from 2,200 to 26,000 m³/h.
Attributes and special features: Optimised noise behaviour, optimised for full bell mouth applications, 100% speed controllable.
Applications: Ventilation, air conditioning, heating, refrigeration, agriculture
Specification: 7-sickle bladed die-cast aluminium impeller, sizes from 350 to 650 mm, 60 Hz types, air volume (freeblowing) from 2,600 to 11,500 m³/h.
Attributes and special features: Steep performance curve, acoustically optimised, optimised for full bell mouth applications, 100% speed controllable by voltage reduction.
Specification: 5-bladed aluminium sheet metal impeller, sizes from 315 to 650 mm, available in both air flow directions, 3 different blade angles, 60 Hz and UL types, air volume (freeblowing) from 2,000 to 11,500 m³/h.
Attributes and special features: Fan optimised for short bell mouth applications, enhanced fan curve stability, fan blade design optimised for low noise.
Specification: Axial fans equipped with integrated electronic frequency inverter speed controls. The result is a highly efficient and extremely compact speed controlled fan. The FREvent system is well priced, and is fitted with motors optimised for efficiency.
Attributes and special features: The most energy efficient system, without electronic motor noise, 100% speed controllable, integrated process controller.
Applications: Refrigeration, agriculture, air conditioning, heating technology
Specification: Axial fans equipped with integrated electronic commutation speed controls. The result is a highly efficient and extremely compact speed controlled fan. The electronically commutated ETAvent system offers the highest possible efficiency.
Attributes and special features: Energy saving, without electronic motor noise, 100% speed controllable, integrated process controller.
Applications: Refrigeration, agriculture, air conditioning, heating technology
Specification: Double inlet centrifugal fans in compact scroll housings with forward curved blades. Impeller diameters from 200 to 400 mm are available, resulting in air volumes up to 14,000 m³/h.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller. Housing also possible with discharge flange and baseboard. Housing designs in aluminium and sheet steel.
Applications: Close control units, air heaters, exhaust plants, gate and door air-curtains, cleanrooms, flat devices
Specification: Double inlet centrifugal fans in standard scroll housings with forward curved blades. Impeller diameters from 200 to 450 mm are available, giving air volumes up to 21,000 m³/h.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller.
Applications: Close control units, air heaters, exhaust plants, gate and door air-curtains
Specification: Double inlet centrifugal fans with forward curved blades in inch dimensions. Impeller diameters from 9 to 15 inch are available, resulting in air volumes up to 11,000 m³/h.
Attributes and special features: Optimal motor cooling and a compact construction achieved through the centrally mounted voltage-controllable external rotor motor in the impeller. Vibration eliminators are fitted between the motor mountings and the housing.
Applications: Close control units, air heaters, kitchen exhaust systems, suction units
Specification: Single inlet G series motorised impellers, intended for use without scroll housings. Impeller diameters from 315 to 450 mm are available, resulting in air volumes up to 6,000 m³/h.
Attributes and special features: Optimal motor cooling and a compact construction achieved through integrating the voltage controllable external rotor motor into the impeller. Low rotational noise impeller for noise-critical applications.
Applications: Duct, tube and roof fans, air conditioning units, heat pumps, cleanrooms, and for cooling and ventilation purposes
Specification: The mixed-flow impeller is available in diameters from 355 to 560 mm and achieves air volumes of up to 15,000 m³/h (free blowing). Plastic impellers are available in diameters from 355 to 450 mm. Impellers with diameters from 500 to 560 mm are available with welded aluminium construction.
Attributes and special features: Optimal motor cooling and a compact construction achieved by integrating the voltage controllable external rotor motor into the impeller.
Applications: For housing fans, duct, tube and roof fans, in air conditioning units, heat pumps, cooling and ventilation purposes
Specification: Cross-flow fans with cylinder diameters from 60 to 120 mm and construction lengths of up to 1,200 mm. Housing with flow-through in 90° or 180° direction. Housing made using stable aluminium continuous-casting technology. Cylinders available in all frame sizes with and without scroll housings.
Attributes and special features: 19" plug-in system, motor drive in 24 V direct current design (brushless electronic motor) can be supplied, 100% speed controllable.
Applications: Electronic cooling, process engineering, ventilation, cooling, climatisation, automotive air conditioning
Specification: Ziehl-Abegg external rotor motors combine the advantages of compact and space saving construction with the proven drive concept of a wear-free squirrel cage motor. 9 frame sizes are available in an output range of 0.1 to 7 kW and 2 constructional designs for flange or axis fastening. These external rotor motors are 100% speed controllable. Electronically commutated direct-current motors including the necessary EC controllers are also available. They are effective in many applications through their constant torque and high efficiency.
Operating instructions: Ръководство за експлоатация Двигатели с външен ротор L-BAL-026-BG (311 kb, downloads: 105, ) version/date: 05/08 Index 005 Ръководство за експлоатация Двигатели с външен ротор L-BAL-026-BG За вентилаторни задвижвания с увеличена безопас-
ност „e“ II 2G EEx e II, T1, T2, T3 или T4 съгласно
директива 94/9/EG(Ex e II T1, T2, T3 или T4 съгласно
IEC 60079-0; IEC 60079-7)-Типова серия MK-..Y (с регу-
лируеми обороти чрез пад на напрежението) Driftsvejledning udvendige rotormotorer L-BAL-026-DK (294 kb, downloads: 86, ) version/date: 04/08 Index 005 Driftsvejledning udvendige rotormotorer L-BAL-026-DK Til ventilatordrev i Øget sikkerhed "e" II 2G EEx e II, T1,
T2, T3 eller T4 iht.direktiv 94/9/EF (Ex e II T1, T2, T3 eller
T4 iht. IEC 60079-0; IEC 60079-7)-typeserie MK-..Y
(omdrejningstalregulerbar ved sænkning af spændingen) Ex Operating Instructions External Rotor Motors L-BAL-026-GB (289 kb, downloads: 2612, ) version/date: 05/08 Index 005 Based on DIN EN 60034-1 for fan drives
in increased safety „e“ II 2G EEx e II, T1, T2, T3 or T4 in accordance with directive 94/9/EU (Ex e II T1, T2, T3 or T4 to IEC 60079-0; IEC 60079-7)
- MK model range - . .Y (speed controllable
by voltage reduction) Ex Operating Instructions External Rotor Motors L-BAL-030-GB (165 kb, downloads: 2385, ) version/date: 05/08 Index 003 In accordance with DIN EN 60079-15 (IEC 60079-15: 2001, modified) for fan drives with ignition protection „n“ II 3G EExnA II T1, T2 or T3 (T1, T2, T3 or T4) based on directive 94/9/EU
- Model series MK - . .Z (speed controllable through voltage reduction) Naudojimo instrukcija Išoriniai rotorių varikliai L-BAL-026-LT (515 kb, downloads: 87, ) version/date: 04/08 Index 005 Naudojimo instrukcija Išoriniai rotorių varikliai L-BAL-026-LT Padidinto saugumo ventiliatoriaus pavaroms „e“ II 2G
EEx e II, T1, T2, T3 arba T4pagal direktyvą 94/9/EB(Ex e II
T1, T2, T3 or T4pagal IEC 60079-0; IEC 60079-7)-tipo
klasė MK-..Y (apsukų skaičius reguliuojamas mažinant
įtampą) Operating Instructions Electronically Commutated (EC) External Rotor Motors L-BAL-014-GB (147 kb, downloads: 2449, ) version/date: 04/08 Index 002 System ETAvent Operating Instructions Electronically Commutated (EC) External Rotor Motors L-BAL-028-GB (92 kb, downloads: 2638, ) version/date: 05/08 Index 002 System ETAvent
With integrated EC-Controller Operating Instructions permanently excited generators L-BAL-027-GB (105 kb, downloads: 2284, ) version/date: 05/08 Index 002
Declarations of incorporation/conformity: Declaration of Conformity ZA75 (485 kb, downloads: 4681, ) External rotor motor, axial, centrifugal and crossflow fans Declaration of Conformity ZA75ex (343 kb, downloads: 4138, ) External rotor motors, axial and centrifugal fans for explosion-hazardous areas Declaration of incorporation ZA74 (69 kb, downloads: 4641, ) External rotor motor, axial, centrifugal and crossflow fans Declaration of incorporation ZA74ex (82 kb, downloads: 3658, ) External rotor motors, axial and centrifugal fans for explosion-hazardous areas
Specification: For simple manual speed regulation 5-step transformer-based controllers for single-phase and three-phase fans are available. We supply the corresponding switchgear for multi-speed motors. Motor protection devices are available for thermal monitoring based on thermostats or thermistors (PTC).
Attributes and special features: Rugged design technology, well priced.
Applications: Air conditioning, refrigeration, heating technology, agriculture
